DVXplorer
Date: 2024-10-15
Mass production DVS sensor in 90 nm BSI CIS technology
VGA (640x480) resolution event output with up to 110 dB dynamic range, sub 1ms latency, 200 µs temporal resolution and up to 165 million events per second throughput
6-axis IMU, up to 8 kHz sampling rate
Supports multi-camera time synchronization via daisy chain connection and external event injection
Consumes less than 140 mA at 5 V power supply
Anodized aluminium case with CS lens mount, 4-side mounting options.
Screw-locked USB port and fully isolated multi-camera sync ports
Specifications
Event Output
Description |
Value |
|---|---|
Spatial Resolution |
640 x 480 |
Temporal Resolution 1 |
200 µs |
Typical Latency 2 |
<1 ms |
Max Throughput |
165 MEPS |
Dynamic Range |
~ 90 dB (3-100k lux with 99.9% of pixels respond to 27.5% contrast), |
Contrast Sensitivity |
13% (with 50% of pixels respond), 27.5% (with 99.9% of pixels respond) |
1 The temporal resolution is characterized by the timestamp unit. In fact, a timestamp unit of 1 us offers minimum gain over a timestamp unit of 200 us. For more explanation, please refer to our white paper.
2 The temporal latency is given as a nominal number and can be improved with strong lighting or optimised biases.
IMU
6-axis (Gyro + Accelerometer), up to 8 kHz sampling rate. The IMU is synchronized with the event and frame output. Read more in the IMU section.
Camera Synchronization / Trigger Input
Supports multi-camera time synchronization via daisy chain connection and external event injection.
Other Attributes
Description |
Value |
|---|---|
Dimensions [mm] |
W 40 x H 60 x D 25 |
Weight |
100 g without lens |
Lens Mount |
CS-mount |
Case Material |
Anodized aluminium |
Mounting Options |
4-side Whitworth 1/4”-20 female and M3 mounting points |
Connectors |
USB 3.0 micro B port with locking screws, fully isolated sync input and output connectors |
Multi-cam sync |
Yes |
Power Consumption |
<140 mA @ 5 VDC (USB) |
Sensor Technology |
90 nm BSI CIS |
Pixel Pitch [µm] |
9 µm |
Sensor Supply Voltage |
1.2V, 1.8 V and 2.8 V |
Certifications |
CE |
Specifications not guaranteed. All specifications subject to change without notice.
Physical Dimensions
The DVXplorer camera is housed in an anodized aluminum case. The case dimensions are depicted below.
Connectors
DVXplorer has three connectors on the back. One USB 3.0 Micro B connector for data and power, and two sync connectors for multi-camera synchronization or external trigger input.
USB 3.0 Connector
The USB 3.0 Micro B connector is used for data and power. Any USB 3.0 or USB 2.0 cable with Micro B type connector can be used. However, USB 3.0 speeds are only supported when using a USB 3.0 cable. Usage of cables with appropriate locking screws are recommended for a more secure and robust connection.
Sync Connectors
The synchronization connectors are HiRose HR10A-7R-4P (male, SYNC OUTPUT) and HR10A-7R-4S (female, SYNC INPUT) connectors. Cables should use the matching connectors HR10A-7P-4S (female) and HR10A-7P-4P (male).
Please note that to keep full electrical isolation between different cameras, the cable should not be shielded, or if it is, the shield should not connect one end of the cable to the other.
Input signals can be 3.3V or 5V, depending on the VDD_IN supplied externally, output signals are 5V, as is VDD_OUT. If you chain cameras together for synchronization, the clock and VDD will be 5V, for example.
Synchronization connectors pinout is shown in the image above. Please note that all the pins in the SYNC IN ports are isolated from the SYNC OUT ports.
Optics
The camera lens mount is designed to accommodate CS-mount lenses. Other lenses can be accommodated by using adapters. The standard lens shipped with the camera is a C-mount lens and ships with an adapter. The chip requires a lens designed for 1/2.5” imagers.
The field of view (FOV) depends on the focal length L of the lens and the size W of the pixel array. It is computed from geometrical optics, not accounting for any lens distortion. The angular field of view (AFOV) is given by:
The linear FOV (LFOV) at a distance D from the lens is given by:
The pixel array has a resolution of 640 x 480 and measures:
Width: 640 pixels x 9.0 µm/pixel = 5.76 mm
Height: 480 pixels x 9.0 µm/pixel = 4.32 mm
Diagonal: 7.20 mm
Computed Field of View
The following table shows the horizontal and vertical field of view in degrees and its size at various distances for different common focal lengths.
Lens Focal |
Horizontal Angular |
Vertical Angular |
Diagonal Angular |
Horizontal Linear FoV |
Horizontal Linear FoV |
Horizontal Linear FoV |
Horizontal Linear FoV |
|---|---|---|---|---|---|---|---|
2.10 |
107.80 |
91.61 |
119.49 |
27.43 |
82.29 |
274.29 |
548.57 |
2.80 |
91.61 |
75.30 |
104.25 |
20.57 |
61.71 |
205.71 |
411.43 |
3.00 |
87.66 |
71.51 |
100.39 |
19.20 |
57.60 |
192.00 |
384.00 |
3.60 |
77.32 |
61.93 |
90.00 |
16.00 |
48.00 |
160.00 |
320.00 |
4.50 |
65.24 |
51.28 |
77.32 |
12.80 |
38.40 |
128.00 |
256.00 |
6.00 |
51.28 |
39.60 |
61.93 |
9.60 |
28.80 |
96.00 |
192.00 |
9.00 |
35.49 |
26.99 |
43.60 |
6.40 |
19.20 |
64.00 |
128.00 |
12.00 |
26.99 |
20.41 |
33.40 |
4.80 |
14.40 |
48.00 |
96.00 |
16.00 |
20.41 |
15.38 |
25.36 |
3.60 |
10.80 |
36.00 |
72.00 |
Additional Information
Software
DVXplorer is compatible with all our software. You can use it in:
Serial Number
The serial number of the device can be found on the case, usually a five-digit number printed on a label located on the back of the camera case.
Package Contents
DVXplorer ships with the following items:
DVXplorer camera
USB 3.0, 1m with locking screws
Varifocal C mount lens ( Datasheet)
CS to C mount lens adapter
Tripod
Safety Information
To prevent damage to property or injury to yourself or to others, read this safety information in its entirety before using this product.
This product is intended to be used in a laboratory and for industrial applications under controlled conditions.
We strongly recommend that you only use high quality USB cables, like the ones provided by iniVation. Using low quality USB cables could cause damages to the device.
Keep the product dry. Do not handle the product with wet hands. Do not handle the plug with wet hands. Do not operate the camera near water. This could cause damage to the device. The camera is not water-safe.
Handling: Handle your product with care. It is made of metal, glass, and plastic and has sensitive electronic components inside. The product can be damaged if dropped, burned, punctured, or crushed, or if it comes in contact with liquid. If you suspect damage to the product, please contact iniVation.
Repairing: Do not open the product and do not attempt to repair the product yourself. Disassembling the product may damage it and will void your warranty. If your product is damaged or malfunctions, please contact iniVation.
Do not disassemble or modify this product.
Do not touch internal parts that become exposed as the result of a fall or other accident.
Keep this product out of reach of children. Should a child swallow any part of this product, seek immediate medical attention.
Use travel converters or adapters designed to convert from one voltage to another or with DC-to-AC inverters.
Explosive and other atmospheric conditions. Connecting or using the product in any area with a potentially explosive atmosphere, such as areas where the air contains high levels of flammable chemicals, vapors, or particles (such as grain, dust, or metal powders), may be hazardous. Exposing the product to environments which have high concentrations of industrial chemicals, including near evaporating liquified gasses such as helium, may damage or impair the product’s functionality.
Turn this product off when its use is prohibited.
Do not leave the product where it will be exposed to elevated temperatures for an extended period such as in an enclosed automobile or in direct sunlight. This can lead to malfunction.
Correct Disposal
This product and its electronic accessories should not be disposed of with
other household waste. If you are unable to dispose of this item safely please return it to iniVation AG.
CE Certification
iniVation declares that this device is CE certified. This product is not ATEX approved.